Filters
Manufacturer
More in this category
part#
description
manufacturer
2839224
Base element for protective plug PT with protective circuit for two 2-wire floating signal circuit, gas-filled surge arrester between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm
Phoenix Contact
STOCK: 147
Fast shipping2695439
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rails according to EN 60715
Phoenix Contact
STOCK: 141
Fast shipping2700107
LED permanent light element, 24 V AC/DC, red
Phoenix Contact
STOCK: 139
Fast shipping2804704
Surge protection in one-piece 6.2 mm wide DIN rail module for four floating signal wires.
Phoenix Contact
STOCK: 124
Fast shipping2902829
2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP switches, with screw connection technology and standard configuration.
Phoenix Contact
STOCK: 115
Fast shipping2904891
450 mm long Rogowski coil. The measuring coil diameter when installed is 140 mm. The Rogowski coil is used for AC current measurement for busbars and power lines.
Phoenix Contact
STOCK: 105
Fast shipping0801505
Marker for end clamp, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snapped into marker carrier, lettering fi
Phoenix Contact
STOCK: 97
Fast shipping1109673
Medium surge protection with integrated status indicator for a 2-wire floating signal circuit.
Phoenix Contact
STOCK: 93
Fast shipping2864406
MCR 3-way isolating amplifier, for electrical isolation of analog signals, with screw connection, input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA
Phoenix Contact
STOCK: 91
Fast shipping2865382
Ex i measuring transducer repeater power supply, 2-channel; HART-transparent. Supplies Ex i 2-conductor measuring transducers and transmits the 4…20 mA signal from the Ex area to the safe area. 5-way electrical isolation, screw connection, up to SIL 3, PL
Phoenix Contact
STOCK: 83
Fast shipping2902832
The configurable frequency transducer is suitable for the connection of NAMUR proximity sensors as well as for sensors with NPN and PNP outputs. Configurable via DIP switch and teach-in wheel. Screw connection, standard configuration.
Phoenix Contact
STOCK: 76
Fast shipping2864095
MCR potiposition transducer for conversion of potentiometer positions into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ
Phoenix Contact
STOCK: 74
Fast shipping2811271
Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers.
Phoenix Contact
STOCK: 72
Fast shipping1003824
USB HART modem cable for communication between a PC and HART devices, cable length: 1m.
Phoenix Contact
STOCK: 69
Fast shipping2856126
Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.
Phoenix Contact
STOCK: 68
Fast shipping2902040
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard c
Phoenix Contact
STOCK: 67
Fast shipping2906741
Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for two signal wires with common reference potential, e.g., Digital IN/OUT.
Phoenix Contact
STOCK: 66
Fast shipping2901995
Single-channel input loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Push-in connection technology.
Phoenix Contact
STOCK: 66
Fast shipping2864655
MCR passive isolator, 2-channel, for the electrical isolation of current signals without auxiliary power, with screw connection
Phoenix Contact
STOCK: 63
Fast shipping2906600
Fuse module for VIP I/O-Marshalling base elements with replaceable 1 A fuses in the field device supply path and in the signal path. Integrated test points and a disconnect knife enable uninterrupted signal measurement.
Phoenix Contact
STOCK: 61
Fast shipping
Items per page: