2986960 Phoenix Contact Electrical Safety Devices

2986960 Product Details

• Width
  17.5 mm
• Ambient temperature (storage/transport)
  -40 °C ... 70 °C
• Inrush current
  max. 100 mA
• Filter time
  max. 5 ms (at A1 in the event of voltage dips at Us)
• Inrush current, minimum
  5 mA (N/O contact / N/C contact)
• Mechanical service life
  10x 106 cycles
• Mounting type
  DIN rail mounting
• Conductor cross section solid
  0.2 mm² ... 2.5 mm²
• Safety Integrity Level (SIL)
  3
• Rated insulation voltage
  250 V
• Rated surge voltage/insulation
  Safe isolation, reinforced insulation 6 kV between the control circuits (A1/A2), (31/32), (13/14, 23/24)
• REACh SVHC
  Lead 7439-92-1
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 7.0
  27371819
• ETIM 3.0
  EC001449
• ETIM 4.0
  EC001449
• ETIM 7.0
  EC001449
• UNSPSC 21.0
  39122205
• Depth
  114.5 mm
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
Protective circuit
Surge protection Suppressor diode, 33 V (A1 - A2)
Contact material
AgCuNi, + 0.2 µm Au
Interrupting rating (ohmic load) max.
120 W (24 V DC, τ = 0 ms, N/C contact: 2.4 W)
Nominal operating mode
100% operating factor
pluggable
Yes
Stop category
0
Designation
Air clearances and creepage distances between the power circuits
Standards/regulations
DIN EN 50178/VDE 0160
Vibration (operation)
10 Hz ... 150 Hz, 2g
ECLASS 4.0
40020600
ECLASS 5.1
27371900
ECLASS 9.0
27371819
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C (observe derating)
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Input voltage range
20.4 V DC ... 26.4 V DC
Typ. starting time with Us
50 ms
Operating voltage display
1 x yellow LED
Maximum switching frequency
0.5 Hz
Maximum inrush current
5 A (N/O contact)
Sq. Total current
50 A2 (observe derating)
Output fuse
10 A gL/gG (N/O contact)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Min. degree of protection of inst. location
IP54
Housing material
PBT
Stripping length
7 mm
Safety Integrity Level Claim Limit (SIL CL)
3 (max. 10% of the entire SIL; diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 90% )
Overvoltage category
III
Conformance
CE-compliant
ECLASS 4.1
40020600
ECLASS 5.0
27371900
ECLASS 6.0
27371800
UNSPSC 6.01
30211901
UNSPSC 12.01
39121501
UNSPSC 20.0
39122205
Height
99 mm
Maximum altitude
≤ 2000 m (Above sea level)
Power consumption at US
typ. 1.32 W
Typical release time
50 ms
Contact type
2 enabling current paths
Limiting continuous current
5 A (N/O contact, pay attention to the derating)
Switching capacity
min. 75 mW
Net weight
155 g
Degree of protection
IP20
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Performance level (PL)
e (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Rated control circuit supply voltage US
24 V DC -15 % / +10 %
Rated control supply current IS
typ. 55 mA
Recovery time
1 s
Maximum switching voltage
250 V AC/DC (N/O contact / N/C contact, observe the load curve)
Minimum switching voltage
15 V AC/DC (N/O contact / N/C contact)
Maximum interrupting rating (inductive load)
72 W (24 V DC, τ = 40 ms, N/C contact: 2.4 W)
Mounting position
any
Connection method
Screw connection
Conductor cross-section AWG
24 ... 12
Screw thread
M3
Category
4 (Diagnostic coverage (DC) of the control unit at A1/A2 must be ≥ 99%)
Degree of pollution
2
Shock
15g
ECLASS 10.0.1
27371819
ECLASS 11.0
27371819
ETIM 2.0
EC001449
ETIM 6.0
EC001449
UNSPSC 11
39121501
UNSPSC 13.2
39121501
UNSPSC 19.0
39122205

Product condition