2981965 Phoenix Contact Electrical Safety Devices
Part#:2981965
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 84
May 10, 2024
About the product: Safe coupling relay with force-guided contacts, 5 N/O contacts, 1 N/C contact, width: 22.5 mm, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2981965 Phoenix Contact price in the box on the right side or send a quick quote.
2981965 Product Details
- Depth 112 mm
- Rated control circuit supply voltage US 24 V AC/DC -15 % / +10 %
- Operating voltage display 1 x green LED
- Contact material AgSnO2
- Inrush current, minimum 10 mA
- Mechanical service life 10x 106 cycles
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Housing material PBT
- pluggable Yes
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Safety Integrity Level (SIL) 1
- Width 22.5 mm
- Ambient temperature (operation) -20 °C ... 55 °C
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Input voltage range 20.4 V AC/DC ... 26.4 V AC/DC
- Protective circuit Surge protection Varistor
- Maximum switching voltage 230 V AC/DC (Observe the load curve)
- Limiting continuous current 6 A (N/O contact)
- Overvoltage category III
- Height 114.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Inrush current typ. 350 mA DC (Δt < 1 µs at Us)
- Maximum switching frequency 0.5 Hz
- Sq. Total current 72 A2
- Switching capacity (360/h cycles) 4 A (24 V (DC13))
- Mounting position vertical or horizontal
- Housing color yellow
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Designation Air clearances and creepage distances between the power circuits
- Performance level (PL) c
- Standards/regulations DIN EN 50178
- ECLASS 5.0 27371600
- ETIM 2.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 20.0 39122334
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Power consumption at US typ. 1.2 W
- Typical release time typ. 20 ms (when controlled via A1)
- Maximum inrush current 6 A
- Maximum interrupting rating (inductive load) 42 W (N/O contact, 24 V DC, τ = 40 ms)
- Nominal operating mode 100% operating factor
- Net weight 140 g
- Min. degree of protection of inst. location IP54
- Conductor cross-section AWG 24 ... 16
- Category 1
- Rated insulation voltage 250 V
- Conformance CE-compliant
- ECLASS 11.0 27371819
- ECLASS 7.0 27371601
- UNSPSC 6.01 30211901
- UNSPSC 11 39121501
- Maximum altitude max. 2000 m (Above sea level)
- Rated control supply current IS typ. 47 mA
- Typ. starting time with Us typ. 20 ms (when controlled via A1)
- Recovery time < 500 ms
- Contact type 5 enabling current paths
- Minimum switching voltage 5 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (N/O contact, 24 V DC, τ = 0 ms)
- Output fuse 10 A gL/gG (N/O contact)
- Mounting type DIN rail mounting
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Stripping length 8 mm
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 1
- Vibration (operation) 10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
- Shock 15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
- ECLASS 4.1 27371100
- ETIM 6.0 EC001437
- UNSPSC 13.2 39121501
- Switching capacity min. 50 mW
- Switching capacity according to IEC 60947-5-1 3 A (24 V (DC13))
- Degree of protection IP20
- Connection method Push-in connection
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Torque 0.6 Nm
- Rated surge voltage/insulation 4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.)
- ECLASS 10.0.1 27371601
- ECLASS 6.0 27371600
- ECLASS 5.1 27371600
- ETIM 3.0 EC001449
- UNSPSC 18.0 39122334
- UNSPSC 21.0 39122334
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27371100
- ECLASS 9.0 27371601
- ETIM 4.0 EC001449
- ETIM 7.0 EC001437
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122334
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$151.54
2981965
Stock:
84
Select Qty:
$151.54
$151.54 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨