IOLOGIK E1242 Moxa Data & Networking Devices

IOLOGIK E1242 Product Details

• Standards
  Telcordia SR332
• Green Product
  RoHS, CRoHS, WEEE
• EMS
  IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV; IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV; IEC 61000-4-6 CS: 10 V; IEC 61000-4-8 PFMF
• Time
  502,210 hrs
• EMI
  CISPR 32, FCC Part 15B Class A
• Warranty Period
  5 years
• Vibration
  IEC 60068-2-6
• Safety
  UL 508
• Freefall
  IEC 60068-2-32
• EMC
  EN 55032/24, EN 61000-6-2/-6-4
• Shock
  IEC 60068-2-27
• Hazardous Locations
  ATEX, Class I Division 2
• Operating Temperature
  -10 to 60°C (14 to 140°F)
• Altitude
  4000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
• Ambient Relative Humidity
  5 to 95% (non-condensing)
• Wiring
  I/O cable, 16 to 26 AWG; Power cable, 12 to 24 AWG
• Installation
  DIN-rail mounting, Wall mounting
• Weight
  200 g (0.44 lb)
• Power Consumption
  139 mA @ 24 VDC
• Storage Temperature (package included)
  -40 to 85°C (-40 to 185°F)
Dimensions
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
No. of Power Inputs
1
Input Voltage
12 to 36 VDC
Power Connector
Screw-fastened Euroblock terminal
Housing
Plastic
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Mode
Server (Slave)
Max. No. of Client Connections
10
Authentication
Local database
Max. No. of Scanner Connections
9 (for read-only), 1 (for read/write)
Management
RESTful API, SNMPv1/v2c, SNMPv1 Trap, HTTP, DHCP Client, BOOTP, IPv4, TCP/IP, UDP
LED Indicators
Power, Ready, Port 1, Port 2
Security
Access control list
Industrial Protocols
Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, EtherNet/IP Adapter
MIB
Device Settings MIB
Configuration Options
Web Console (HTTP), Windows Utility (ioSearch), MCC Tool
Accuracy
±0.1% FSR @ 25°C; ±0.3% FSR @ -10 to 60°C
Sampling Rate
12 samples/sec per module (shared between up to 4 channels) If N channels are enabled, the sampling rate for each enabled channel = 12/N samples/sec.
Magnetic Isolation Protection
1.5 kV (built-in)
10/100BaseT(X) Ports (RJ45 connector)
2, 1 MAC address (Ethernet bypass)
Input Impedance
10 mega-ohms (min.)
Built-in Resistor for Current Input
120 ohms
Input Range
0 to 10 VDC; 0 to 20 mA; 4 to 20 mA; 4 to 20 mA (with burn-out detection)
Resolution
16 bits
Points per COM
4 channels
Digital Filtering Time Interval
Software configurable
Over-Voltage Protection
35 VDC
Pulse Output Frequency
500 Hz (max.)
Over-Current Protection
2.6 A per channel @ 25°C
Current Rating
200 mA per channel
Wet Contact (DI to COM)
On: 10 to 30 VDC; Off: 0 to 3 VDC
I/O Type
Sink
Counter Frequency
250 Hz
Over-Temperature Shutdown
175°C (typical), 150°C (min.)
Dry Contact
On: short to GND; Off: open
Buttons
Reset button
Configurable DIO Channels (by jumper)
4
I/O Mode
DI or event counter
Analog Input Channels
4
Connector
Screw-fastened Euroblock terminal
Isolation
3k VDC or 2k Vrms
Digital Input Channels
4
Sensor Type
Dry contact; Wet contact (NPN or PNP)

Product condition

Related documents IOLOGIK E1242 Specs