Name: E2E-X5C118 2M
Brand: Omron

This item can ship within 24h!

ATV630D15N4

$1.30

Schneider Electric ATV630D15N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM (permanent magnet) motors, and sensorless estimated flow rate. The drive offers accurate measurement and installation energy drift detection, embedded Ethernet for direct system configuration and monitoring, and integration of actual pump curves for system optimization. It also includes overvoltage limitation at motor terminals, continuous and historical real-time measurements with customizable dashboards, and predictive and preventive maintenance tracking functions. Designed with a built-in EMC filter (class C2) and ATEX compliance, it operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 31.7A (normal-duty; 4kHz), 23.5A (heavy-duty; 4kHz), with a maximum current of 34.9A (normal-duty; for 60s) and 35.3A (heavy-duty; for 60s). It supports wall mounting, uses Modbus and Modbus TCP Ethernet for communication, and is designed for a 3-phase (3P) network with an output frequency of 0.1-500 Hz. The drive includes 2 x analog outputs (0-10Vdc / 0-20mA), 4 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for Safe Torque Off. It also features 1 x digital output (C/O SPDT relay contact) and 2 x digital outputs (NO relay contacts), along with 1 x analog input and 2 x analog inputs compatible with various signal types. Current consumption is specified for different operating conditions, and the rated active power is 15kW (normal-duty) and 11kW (heavy-duty), corresponding to 20HP and 15HP respectively.

Schneider Electric

This item can ship within 24h!

ATV630D22N4

$1.45

Verified stock: 3

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

This item can ship within 24h!

ATV630D90N4

$3.56

Verified stock: 2

Schneider Electric ATV630D90N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C3), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This model supports a supply voltage range of 323-528Vac, accommodating 380Vac, 400Vac, 480Vac, and 500Vac nominal values. It measures H922mm x W290mm x D323mm. The ATV630D90N4 offers a rated current of 173A for normal-duty operations at 4kHz and 145A for heavy-duty operations at the same frequency, with maximum currents of 190.3A (normal-duty) and 217.5A (heavy-duty) for 60 seconds. It includes various functions such as STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. The drive features embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and supports predictive and preventive maintenance tracking. Communication is facilitated through Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency range of 0.1-500 Hz. It has 2 analog outputs, 7 digital inputs including STO, and 3 digital outputs, alongside 3 analog inputs supporting various signal types. The current consumption is specified for different voltages and duties, with rated active power of 90kW (normal-duty) and 75kW (heavy-duty), corresponding to 125HP and 100HP respectively.

Schneider Electric

This item can ship within 24h!

ATV930D22N4

$1.13

Verified stock: 8

Schneider Electric ATV930D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 930 series. It features an enclosed design with Safe Torque Off (STO) functionality up to SIL3, constant load torque standard, and optimized torque mode for PM (permanent magnet) motors. This model offers motor control with an overload torque up to 180% Tn in both open or closed loops and supports Master/Slave and load sharing with drive-to-drive capability. It includes continuous and historical real-time measurements with customizable dashboards and predictive maintenance capabilities. The ATV930D22N4 comes with a built-in EMC filter (class C2), a built-in braking unit, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Its dimensions are H545.9mm x W211mm x D235mm, with an IP21 degree of protection. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 55.6A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and supports communication protocols such as Modbus, Modbus TCP, and Ethernet/IP. The network is 3-phase (3P) with an output frequency of 0.1-599 Hz. It features 2 x analog outputs (0-10Vdc / 0-20mA), 6 x digital inputs (24Vdc; sink/source) plus 2 additional digital inputs programmable as pulse inputs, and 1 x digital input for STO. Additionally, it has 1 x digital output (24Vdc; 30kHz pulse max), 1 x digital output (24Vdc; 1kHz PTO), 1 x digital output (C/O SPDT relay contact), 2 x digital outputs (NO relay contacts), and 3 x analog inputs for versatile connectivity. The current consumption is specified for different voltages and duties, with a rated active power of 22kW (normal-duty) and 18.5kW (heavy-duty), equivalent to 30HP and 25HP respectively.

Schneider Electric

This item can ship within 24h!

ATV630D45N4

$1.80

Verified stock: 9

Schneider Electric ATV630D45N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series. It features a built-in EMC filter (class C2), ATEX compliance, and is designed for wall mounting with an IP21 UL type 1 degree of protection. This model operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.) and has dimensions of H673mm x W226mm x D271mm. It supports a rated current of 88A (normal-duty; 4kHz), 74.5A (heavy-duty; 4kHz), with a maximum current of 96.8A (normal-duty; for 60s) and 111.8A (heavy-duty; for 60s). The ATV630D45N4 offers various functions including STO (Safe Torque Off up to SIL3), constant and variable load torque standards, optimized torque mode for PM motors, sensorless estimated flow rate, and accurate measurement with installation energy drift detection. It features embedded Ethernet for direct access to system configuration and monitoring, integration of actual pump curves, limitation of overvoltage at motor terminals, and supports predictive and preventive maintenance tracking functions. The network frequency output ranges from 0.1-500 Hz on a 3-phase network. It includes 2 analog outputs (0-10Vdc / 0-20mA), 4 digital inputs (24Vdc; sink/source) programmable as DI1-DI4, 2 digital inputs (24Vdc; sink/source) programmable as pulse inputs DI5-DI6, 1 digital input for STO (24Vdc; source) as STOA and STOB, and 1 digital output (C/O SPDT relay contact) plus 2 digital outputs (NO relay contacts). The analog inputs consist of 1 input (0-10Vdc / 0-20mA / 4-20mA) and 2 inputs (0-10Vdc / 0-20mA / 4-20mA / PTC / Pt100 / Pt1000 / KTY84). The current consumption is rated at 79.8A (380Vac; normal-duty) and 67.1A (380Vac; heavy-duty) with a rated active power of 45kW (normal-duty) and 37kW (heavy-duty), equivalent to 60HP (normal-duty) and 50HP (heavy-duty). Communication is facilitated through Modbus, Modbus TCP, and Ethernet protocols.

Schneider Electric

This item can ship within 5 days!

TSXDEY16D2

$531.67

Verified stock: 7

SINK TR.BLK 16I 24VDC

Schneider Electric

This item can ship within 24h!

E2E-S05S12-WC-B1 2M

$92.00

Verified stock: 35

E2E-S05S12-WC-B1 2M, Mini DC 3-wire Proximity Sensor, Case material: Stainless steel, Supply voltage: 12 to 24 VDC, 10 to 30 VDC, Size: M5

Omron

This item can ship within 3 days!